Consulting services – all

Over the past 35+ years, Process Risk consultants have provided a wide range of Process Safety and Risk Management consulting services. Our goal is to be your one stop resource for all process safety and risk management compliance needs. Our complete network of support services helps provide expertise to match a wide range of needs. We offer all levels of service from program enhancements all the way to turn-key solutions. Some of the most common services are highlighted below. Please send us a note if you can’t find the specific support need below.

Process Hazard Analysis (PHA)

Hazard identification and analysis uses team knowledge, checklists of hazards and process information to determine process, and facility characteristics that could pose safety or environmental hazards that can lead to undesirable consequences. Read More

Process Safety Management (PSM) Program Development

Companies handling highly hazardous chemicals in excess of threshold quantities must comply with OSHA’s Process Safety Management (PSM) standard, 29 CFR 1910.119 as well as related state level programs. Read More

Risk Management Program (RMP) - Development & Support

Companies that handle certain highly hazardous chemicals in excess of threshold quantities must comply with EPA’s Risk Management (RM) Program rule, 40 CFR Part 68...s.... Read More

PSM / RMP Compliance Auditing

OSHA PSM and EPA RMP regulations include a requirement to perform compliance audits every 3 years. Our compliance auditng services can address all regulatory or internal company auditing requirements. Our experienced staff helps identify both compliance deficiencies as well as opportunities to optimize the effectiveness of your safety programs. Read More

PSM / RM Program Enhancement and Optimization

Leverage your existing program to help create a state of the art program that meets the latest guidelines and requirements. Incorporate best industry practices to .... Read More

Procedure Development and Enhancement

Written procedures are required for many activities in a process such as operations and maintenance. Many companies assume their employees can write procedures simply by documenting what they do. However, this approach often produces ineffective procedures. ... Read More

Layers of Protection Analysis (LOPA)

LOPA is considered a more quantitative risk assessment method than a PHA study. It provides an objective, rational and reproducible method of evaluating the risk of hazard scenarios and comparing it with risk tolerance criteria. It is often linked to the results of an associated PHA study. Read More

Hierarchy of Controls Analysis (HCA)

Various types of controls are used in process safety management to manage the risks of catastrophic events in processes involving highly hazardous materials. Certain types of controls provide a more reliable means of controlling risk than others. A review of all control options is a more recent expectation in some state regulations and best practices. Read More

Human Factors Review and Analysis

Human factors are considerations that can impact any operation or the performance of any trained staff. People are key components to the safe operation of industrial processes. They are involved in process design, operation, maintenance, etc. Identifying factors that can adversely impact human operation is key to having a well managed safety program. Read More

Mechanical Integrity

A complete Mechanical Integrity (MI) program is required by the PSM and RMP regulations and is intended to ensure equipment does not fail in a way that causes or affects a release of highly hazardous chemicals. MI covers the design, fabrication, construction / installation, and operation of equipment throughout the entire process life cycle. All maintenance, inspections and testing is included along with the associated training and procedures. Read More

Management of Change (MOC) - Process and Organizational

OSHA PSM and EPA RMP requires Management of Change procedures to ensure hazards associated with the process changes are fully managed and comply with industry codes, standards and recommended practices. It assists in controlling risks to the public, employees and the environment; minimizes business interruption. Read More

Facility Siting & Consequence Modeling

OSHA PSM and EPA RMP include requirements to address facility siting. Facility siting is comprised of several components tied to PHA studies as well as full site consequence modeling including building evaluation, consequence analysis and building risk assessment for the site. Read More

Safety Instrumented Systems (SIS)

ANSI/ISA-S84.00.01-2003, (IEC 61511 Mod), Application of Safety Instrumented Systems for the Process Industries, (called IEC 61511 / ISA 84 here) addresses the application of Safety Instrumented Systems (SIS) ds are needed... Read More

Safeguard Protection Analysis (SPA)

Safeguards protect processes from process safety incidents. They are critically important and consequently, every effort must be exerted to ensure they are functional, effective, and adequate. A focused review of identifed safeguards is now required in certain US regulations. Read More

Incident Investigation

OSHA PSM and EPA RMP require covered facilities to investigate defined incidents. These incidents may include near miss events and root cause analysis. Maximize the learning value from previous incidents and utilize the information to enhance your safety program(s). Read More

Emergency Response Programs

Emergency Response Programs (ERPs) are required and an essential element of process safety and risk management programs. Most facilities have ERPs established however opportunities to update or optimize them may be present for companies in all industries. Read More

Project Support and Process Integration

Projects can stress a facility’s staffing and workload demands depending on scope. Capital projects may address staffing changes during all phases of the project but often can require unplanned additional integration support after startup... Read More

NEP Compliance Support - Select Industries

National Emphasis Programs (NEP) have been established in several industries. These programs place additional demands on various aspects of process safety management to enhance management of risks from catastrophic events in processes involving toxic... Read More

HAZID

Hazard Identification (HAZID) studies use checklists of common potential hazards to identify equipment, materials or activities that could lead to a hazardous condition. These reviews are often performed early in a project lifecycle. Read More

Inherently Safer Technology (IST)

Inherently Safer Technology (IST) can enhance overall chemical safety and security risk management programs. This concept has become a requirement in select state regulations as well as gaining exposure throughout all industries. Benefits can be realized from new projects to existing processes. Read More

Expert Technical Witness - Legal Support Services

Process safety and risk management regulations have been in place since the late 1980s at the state level and the early 1990s at the federal level. Expert support can often be a critical aspect when legal issues arise. Read More

Offsite Consequence Analysis (OCA)

Consequence modeling involves the determination of the impacts of process accidents involving hazardous materials on people, the environment, and the process. Various models are available to match the project needs. Read More

Dust Hazard Analysis and Management

NFPA 652:2016, Standard on the Fundamentals of Combustible Dust, requires that a safety management system (SMS) address the hazards of combustible dusts. Read More

Quantitative Risk Assessment (QRA)

Various types of controls are used in process safety management to manage the risks of catastrophic events in processes involving toxic... Read More

LNG Industry Support

Process Risk provides various support services focused on the LNG industry. Services include environmental impact studies, risk assessment and management services. Strong teaming relationships with specialists in the industry provide a strong link to the latest requirements. Read More